Microscope
From Wikipedia, the free encyclopedia
A microscope (from the Ancient Greek:
μικρός, mikrós, "small" and σκοπεῖν, skopeîn, "to
look" or "see") is an instrument used to see objects that are too small for the naked eye.
The science of investigating small objects using such an instrument is called microscopy.
Microscopic
means invisible to the eye unless aided by a microscope.
There are many types of microscopes,
the most common and first to be invented is the optical microscope which uses light to image the sample. Other major
types of microscopes are the electron microscope (both the transmission electron microscope
and the scanning
electron microscope) and the various types of scanning
probe microscope.
History
The first microscope to be developed
was the optical microscope, although the original inventor is not easy to
identify. One legend states the microscope was invented by Roger Bacon, along
with the telescope sometime in the 1200's. [1]
An early microscope was made in 1590 in Middelburg,
Netherlands.[2]
Two eyeglass
makers are variously given credit: Hans Lippershey
(who developed an early telescope) and Zacharias Janssen. Giovanni Faber
coined the name microscope for Galileo Galilei's
compound microscope in 1625 [3]
(Galileo had called it the "occhiolino" or "little eye").
Rise
of modern light microscopy
The first detailed account of the
interior construction of living tissue based on the use of a microscope did not
appear until 1644, in Giambattista Odierna's L'occhio della mosca, or The
Fly's Eye.[4]
It was not until the 1660s and 1670s
that the microscope was used extensively for research in Italy, The Netherlands
and England. Marcelo Malpighi in Italy began the analysis of biological
structures beginning with the lungs. Robert Hooke's
Micrographia had a huge impact, largely because of its impressive
illustrations. The greatest contribution came from Antonie van Leeuwenhoek who discovered red blood cells and spermatozoa and helped
popularise microscopy as a technique. On 9 October 1676, Van Leeuwenhoek
reported the discovery of micro-organisms.[4]
In 1893 August Köhler
developed a key technique for sample illumination, Köhler illumination, which is central to modern light microscopy. This method
of sample illumination gives rise to extremely even lighting and overcomes many
limitations of older techniques of sample illumination. Further developments in
sample illumination came from Fritz Zernike
in 1953 and George Nomarski 1955 for their development of phase contrast
and differential interference contrast illumination which allow imaging of transparent samples.
Electron
microscopy
In the early 1900s a significant
alternative to light microscopy was developed, using electrons
rather than light
to generate the image. Ernst Ruska started development of the first electron microscope in
1931 which was the transmission electron microscope
(TEM). The transmission electron microscope works on the same principle as an
optical microscope but uses electrons in the place of light and electromagnets
in the place of glass lenses. Use of electrons instead of light allows a much
higher resolution.
Development of the transmission
electron microscope was quickly followed in 1935 by the development of the scanning
electron microscope by Max Knoll.[5]
Electron microscopes quickly became
popular following the Second World War. Ernst Ruska, working at Siemens
developed the first commercial transmission electron microscope and major
scientific conferences on electron microscopy started being held in the 1950s.
In 1965 the first commercial scanning electron microscope was developed by
Professor Sir Charles Oatley and his postgraduate student Gary Stewart and marketed by
the Cambridge Instrument Company as the "Stereoscan".
Scanning
probe microscopy
The 1980s saw the development of the
first scanning
probe microscopes. The first was the scanning
tunneling microscope in 1981, developed by Gerd Binnig
and Heinrich Rohrer. This was closely followed in 1986 with Gerd Binnig, Quate,
and Gerber's invention of the atomic force microscope.
Fluorescence
and light microscopy
The most recent developments in
light microscope largely centre on the rise of fluorescence microscopy in biology. During the last decades of the 20th century, particularly
in the post-genomic
era, many techniques for fluorescent labeling of cellular
structures were developed. The main groups of techniques are small chemical
staining of cellular structures, for example DAPI to label DNA, use of antibodies conjugated to
fluorescent reporters, see immunofluorescence, and fluorescent proteins, such as green
fluorescent protein. These techniques use these
different fluorophores for analysis of cell structure at a molecular level in
both live and fixed samples.
The rise of fluorescence microscopy
drove the development of a major modern microscope design, the confocal microscope. The principle was patented in 1957 by Marvin Minsky,
although laser
technology limited practical application of the technique. It was not until
1978 when Thomas and Christoph Cremer developed the first practical confocal laser scanning microscope and the technique rapidly gained popularity through the
1980s.
Much current research (in the early
21st century) on optical microscope techniques is focused on development of superresolution
analysis of fluorescently labeled samples. Structured illumination can improve resolution by around two to four times and
techniques like stimulated Emission Depletion microscopy are approaching the resolution of electron microscopes.
Types
Microscopes can be separated into
several different classes. One grouping is based on what interacts with the
sample to generate the image, i.e., light or photons(optical
microscopes), electrons (electron microscopes) or a probe (scanning probe
microscopes). Alternatively, microscopes can be classed on whether they analyse
the sample via a scanning point (confocal optical microscopes, scanning electron
microscopes and scanning probe microscopes) or analyse the sample all at once
(wide field optical microscope and transmission electron microscopes).
Wide field optical microscopes and
transmission electron microscopes use the theory of lenses (optics for light microscopes and electromagnet
lenses for electron microscopes) in order to magnify the image generated by the
passage of a wave
transmitted through the sample, or reflected by the sample. The waves used are electromagnetic (in optical microscopes) or electron beams (in electron microscopes). Resolution in these microscopes is limited by the wavelength of the
radiation used to image the sample, where shorter wavelengths allow for a
higher resolution.
Scanning optical and electron
microscopes, like the confocal microscope and scanning electron microscope, use
lenses to focus a spot of light or electrons onto the sample then analyze the
reflected or transmitted waves. The point is then scanned over the sample to
analyze a rectangular region. Magnification of the image is achieved by
displaying the data from scanning a physically small sample area on a
relatively large screen. These microscopes have the same resolution limit as
wide field optical, probe, and electron microscopes.
Scanning probe microscopes also
analyze a single point in the sample and then scan the probe over a rectangular
sample region to build up an image. As these microscopes do not use
electromagnetic or electron radiation for imaging they are not subject to the
same resolution limit as the optical and electron microscopes described above.
Optical
The most common type of microscope
(and the first invented) is the optical microscope. This is an optical instrument containing one or more lenses
producing an enlarged image of a sample placed in the focal plane. Optical
microscopes have refractive glass and occasionally of plastic or quartz, to focus light into the eye or
another light detector. Mirror-based optical microscopes operate in the same
manner. Typical magnification of a light microscope, assuming visible range
light, is up to 1500x with a theoretical resolution
limit of around 0.2 micrometres
or 200 nanometres. Specialized techniques (e.g., scanning confocal microscopy,
Vertico SMI)
may exceed this magnification but the resolution is diffraction
limited. The use of shorter wavelengths of light, such as the ultraviolet, is
one way to improve the spatial resolution of the optical microscope, as are
devices such as the near-field scanning optical microscope.
Sarfus, a recent optical technique increases the sensitivity of standard optical microscope to a point it becomes possible to directly visualize nanometric films (down to 0.3 nanometre) and isolated nano-objects (down to 2 nm-diameter). The technique is based on the use of non-reflecting substrates for cross-polarized reflected light microscopy.
Sarfus, a recent optical technique increases the sensitivity of standard optical microscope to a point it becomes possible to directly visualize nanometric films (down to 0.3 nanometre) and isolated nano-objects (down to 2 nm-diameter). The technique is based on the use of non-reflecting substrates for cross-polarized reflected light microscopy.
Ultraviolet light enables the resolution of microscopic features, as
well as to image samples that are transparent to the eye. Near infrared
light can be used to visualize circuitry embedded in bonded silicon devices,
since silicon is transparent in this region of wavelengths.
In fluorescence microscopy, many wavelengths of light, ranging from the ultraviolet to
the visible can be used to cause samples to fluoresce
to allow viewing by eye or with the use of specifically sensitive cameras.
Phase
contrast microscopy is an optical microscopy illumination technique in which small phase shifts
in the light passing through a transparent specimen are converted into amplitude
or contrast changes in the image. The use of phase contrast does not
require staining
to view the slide. This microscope technique made it possible to study the cell cycle
in live cells.
The traditional optical microscope
has more recently evolved into the digital microscope. In addition to, or instead of, directly viewing the object
through the eyepieces, a type of sensor similar to those used in a digital camera
is used to obtain an image, which is then displayed on a computer monitor.
These sensors may use CMOS or charge-coupled device (CCD) technology, depending on the application.
The entire wiki article can be found at: http://en.wikipedia.org/wiki/Microscope
The intent of this post is to focus on optical microscopes
that might benefit you where you live.
1 comment:
Thanks for this posting.
Your blog is very knowledgeable!! Keep it always updated.
Microscope Illumination
Post a Comment