Darning

Darning

 

From Wikipedia, the free encyclopedia

Darning is a sewing technique for repairing holes or worn areas in fabric or knitting using needle and thread alone. It is often done by hand, but it is also possible to darn with a sewing machine. Hand darning employs the darning stitch, a simple running stitch in which the thread is "woven" in rows along the grain of the fabric, with the stitcher reversing direction at the end of each row, and then filling in the framework thus created, as if weaving. Darning is a traditional method for repairing fabric damage or holes that do not run along a seam, and where patching is impractical or would create discomfort for the wearer, such as on the heel of a sock.

Darning also refers to any of several needlework techniques that are worked using darning stitches:

• Pattern darning is a type of embroidery that uses parallel rows of straight stitches of different lengths to create a geometric design.
• Net darning, also called filet lace, is a 19th century technique using stitching on a mesh foundation fabric to imitate lace.
• Needle weaving is a drawn thread work embroidery technique that involves darning patterns into barelaid warp or weft threads.

Darning cloth

In its simplest form, darning consists of anchoring the thread in the fabric on the edge of the hole and carrying it across the gap. It is then anchored on the other side, usually with a running stitch or two. If enough threads are criss-crossed over the hole, the hole will eventually be covered with a mass of thread.

Fine darning, sometimes known as Belgian darning, attempts to make the repair as invisible and neat as possible. Often the hole is cut into a square or darn blends into the fabric.

There are many varieties of fine darning. Simple over-and-under weaving of threads can be replaced by various fancy weaves, such as twills, chevrons, etc., achieved by skipping threads in regular patterns.

Invisible darning is the epitome of this attempt at restoring the fabric to its original integrity. Threads from the original weaving are unravelled from a hem or seam and used to effect the repair. Invisible darning is appropriate for extremely expensive fabrics and items of apparel.

In machine darning, lines of machine running stitch are run back and forth across the hole, then the fabric is rotated and more lines run at right angles. This is a fast way to darn, but it cannot match the effects of fine darning.

Darning tools

There are special tools for darning socks or stockings:

• A darning egg is an egg-shaped ovoid of stone, porcelain, wood, or similar hard material, which is inserted into the toe or heel of the sock to hold it in the proper shape and provide a firm foundation for repairs. When the repairs are finished, the darning egg is removed. A shell of the tiger cowry Cypraea tigris, a popular ornament in Europe and elsewhere, was also sometimes used as a ready-made darning egg.

• A darning mushroom is a mushroom-shaped tool usually made of wood. The sock is stretched over the curved top of the mushroom, and gathered tightly around the stalk to hold it in place for darning.

• A darning gourd is a hollow dried gourd with a pronounced neck. The sock can be stretched over the full end of the gourd and held in place around the neck for darning.

• A used light bulb can be used to hold a sock in place for darning.

Pattern darning

Pattern darning is a simple and ancient embroidery technique in which contrasting thread is woven in-and-out of the ground fabric using rows of running stitches which reverse direction at the end of each row. The length of the stitches may be varied to produce geometric designs. Traditional embroidery using pattern darning is found in Africa, Japan, Northern and Eastern Europe, the Middle East, Mexico and Peru [1].

Pattern darning is also used as a filling stitch in blackwork embroidery.

The entire wiki link on the subject can be found at:  http://en.wikipedia.org/wiki/Darning